Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.8217555
- Product Categories
- Friendly Links
- home > Supply > Supply Shenzhen conduction, power radiation testing, space radiation testing, surge testing, static testing, lightning test Shenzhen EMS testing, EMI testing, Shenzhen
Supply Shenzhen conduction, power radiation testing, space radiation testing, surge testing, static testing, lightning test Shenzhen EMS testing, EMI testing, Shenzhen
Information Name: | Supply Shenzhen conduction, power radiation testing, space radiation testing, surge testing, static testing, lightning test Shenzhen EMS testing, EMI testing, Shenzhen |
Published: | 2011-03-15 |
Validity: | 360 |
Specifications: | Static testing, lightning test test Shenzhen EMS |
Quantity: | 1.00 |
Price Description: | |
Detailed Product Description: | Frequency Frequency range of 9kHz ~ 3GHz Frequency resolution 0.01Hz Frequency display (receiver mode) digital display Frequency display (analyzer mode) the use of tags or frequency counter SSB phase noise (Carrier 500MHz, offset 10MHz) -145dBc/1Hz (typical) Scan Measurement time per frequency 100μs ~ 100s Sweep (analyzer mode) In the time frame, sweep width = 0Hz In the frequency range, sweep width ≥ 10Hz 1μs ~ 16000s, resolution 125ns 2.5ms ~ 16000s Resolution bandwidth Sweep Filter -3dB bandwidth of 10Hz ~ 3MHz, by 1,3 sequence EMI filter (-6dB, pulse width) 200Hz, 9kHz, 120kHz, 1MHz Video bandwidth (analyzer mode) 1Hz ~ 10MHz, sequence by 1,3 FFT filter (-3dB, analyzer mode) 1Hz ~ 30kHz, 1,3 sequence at Preselector (in the analyzer mode can be turned off) in 11 pre-filter Pre-amplifier (pre-filter and in the mixer to switch between 1) 20dB Level Display range from 30dBm noise level display Maximum input level (RF attenuation ≥ 10dB) DC voltage 0V (DC coupling); 50V (AC coupled) CW RF Power 30dBm Maximum pulse voltage (10μs) 150V Maximum pulse energy (20μs) 10mWs Pulse spectral density 97dBμV/MHz Cross modulation Input 1dB compression point of the mixer (The carrier is greater than 200MHz, 0dB RF attenuation, Preselector and preamplifier off) 5dBm (ratings) Third-order cross-point (TOI, 200MHz ~ 3GHz, level 2 ×-30dBm, Δf> 5 × IF bandwidth or resolution bandwidth, or> 10kHz) Preselector off> 7dBm (typical 10dBm) Preselector open, preamplifier off> 2dBm (typical 5dBm) Preselector open preamp>-18dBm (typical value of-15dBm) Intersection k2 (100MHz ~ 3GHz) Preselector off 35dBm (typical) Preselector open, preamplifier off> 50dBm Preselector open preamp> 35dBm Display noise level (analyzer mode) (0dB RF attenuation, RBW = 10Hz, VBW = 1Hz, sweep width = 0Hz, 20 average, trace average, 50Ω termination, 10MHz ~ 1GHz) Preselector off (AC / DC coupling) <-142dBm (typical-145dBm) Preselector open, preamplifier off <-142dBm (typical-145dBm) Preselector open, pre-amplifier open <-152dBm (typical-155dBm) Display noise level (receiver mode) (AV display, 30MHz ~ 1GHz, BW = 120kHz) Preamplifier off <6dBμV (typical 3dBμV) Preamp <-16dBμV (typical value-19dBμV) Anti-jamming capability Image frequency, IF> 70dB Spurious response (the carrier is greater than 1MHz, No input signal, 0dB RF attenuation) <-103dBm Other Spurious <-70dBc RF leakage Level display, the field strength 3V / m, 0dB RF attenuation, 50Ω terminal, the carrier frequency is not equal to IF <10dBμV (ratings) Level display (receiver mode) Level display, digital numbers, 0.01dB resolution Level display, analog bar graph display, shown separately for each detector Spectrum, level shaft axis 10dB level pass ~ 200dB, 10dB steps Spectrum, user-selectable frequency axis, linear or logarithmic Level display (analyzer mode) The results show 501 × 400 pixels (each figure), can display up to two independent set of graph Logarithmic level display range of 1dB, 10dB ~ 200dB, 10dB steps Linear level display range of 10% of the reference level / scale (10 scale) The maximum number of traces, a Figure 3 Maximum number of trace lines, 2 Figure 6 Level measurement accuracy Total error Preselector and preamplifier off ± 0.5dB Preselector and preamplifier open ± 1dB Quasi-peak to demonstrate compliance with CISPR16-1 standard Trigger function Trigger source free-running, video, external, IF level Trigger bias (span ≥ 10Hz) 125ns ~ 100s Strobe source video, external, IF level Delay 1μs ~ 100s strobe Interface External noise source power BNC, hole, 28V DC IEC / IEEE bus, remote control IEC625-2/IEEE488.2 Serial interface RS-232-C Centronics parallel port printer interface USB interface version 1.1 General Characteristics Monitor 21 cm TFT color display, VGA, +5 ℃ ~ +40 ℃; 0 ℃ ~ +50 ℃ (with option ESCI-B20) Power AC100 ~ 240V, 50Hz ~ 400Hz, 3.1 ~ 1.3A, 70VA Dimensions (W × H × thickness) 412mm × 197mm × 417mm Weight 10.5kg |
Admin>>>
You are the 9219 visitor
Copyright © GuangDong ICP No. 10089450, Shenzhen Li News Product Certification Technical Services Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 9219 visitor
Copyright © GuangDong ICP No. 10089450, Shenzhen Li News Product Certification Technical Services Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility